Kolekcia: FAQ: Ochranné sklo

The purchased glass does not cover the entire display, there is a gap on the sides.
First, please check if you have the right glass for your phone type. Some manufacturers release new versions of phones with the same designation, differing only in the year of release. Another reason why the glass can be smaller is that it is a 2.5D glass that covers the active part of the display, but does not extend to the edges of the phone. These glasses are suitable for use in combination with rear protective covers. There is no collision between the glass and the cover.

What type of protective glass should I use to get the glass to stick all over the surface, meaning the edges of the phone?
Glasses marked "FULL-COVER" protect the entire surface of the display, including the rounded edges. They are not very suitable for combination with the back covers of the phone.

Can the rounded glasses be combined with the back cover of the phone?
It always depends on the type of cover. It is important that the cover does not hug the phone too much, i.e. so that it does not interfere with the display area. For combinations, we recommend choosing 2.5D protective glasses.

How do I know which glass has an adhesive layer over the entire surface or just around the edges?
Such glasses are most often labeled as FullGlue.